The Sectional Dock Bracket (for 42” wide decking) consists of 1-1/2" and 2” pipe with bracketing for use of a modified 55-gallon steel barrel for the above water free method of installation and removal. It is hot dipped and galvanized for added years of life. The End Sectional Bracket is equipped with 4 pre-greased 1/2" diameter 1” long square head set screws, installed in the nuts on the 2” pipe sleeves for locking the “ framework pipe to the dock bracket. It weighs 23 pounds.

 

The Continuous Sectional Bracket is equipped with 6 pre-greased half inch diameter, 1” long square head set screws and weighs 26 pounds.

 

The Platform Dock Bracket (for 62” wide decking) consists primarily of a 2” pipe with bracketing for use of a modified 55-gallon steel barrel for the above water free method of installation and removal. It is hot dipped and galvanized for added years of life. The End Platform Bracket is equipped with 5 pre-greased 1/2" diameter 1” long square head set screws, installed in the nuts on the 2” pipe sleeves for locking the 1-1/2" framework pipe to the platform bracket. It weighs 37 pounds.

 

The Continuous Platform Bracket is equipped with 8 pre greased 1/2" diameter, 1” long square head set screws and weighs 41 pounds.

 

The Sundeck Dock Bracket (84” wide deck surface with two 42” wide decks, side by side) consists of 2” pipe with bracketing for use of 2 servicing barrels for the above water free method of installation and removal. It is hot dipped and galvanized for added years of life.

 

The End Sundeck Bracket is equipped with 4 pre-greased, 1/2" diameter, 1” long, square head set screws installed in the 2” pipe nut on the sleeves. These are used for locking the 1-1/2" framework pipe to the sundeck bracket. Two 5/16” diameter x 3/4" long carriage bolts with nuts are inserted into the sundeck C Channel bracketing. The Sundeck End Bracket weighs 44 pounds.

 

The Continuous Sundeck Bracket is equipped with 6 pre-greased 1/2" diameter, 1” long square head set screws installed in the nut on the 2” pipe sleeves. These are used for locking the 1-1/2" framework pipe to the sundeck continuous bracket. Two 5/16” diameter x 3/4" long carriage bolts with nuts are inserted into the sundeck C Channel bracketing. The Sundeck Continuous Bracket weighs 46 pounds.

 

The Super Sundeck Dock Bracket (124” wide decking surface, with 2 – 62” wide decks, side by side) consists of primarily 2” pipe with bracketing for use with two servicing barrels for above water free method of installation and removal. The Super Sundeck Dock Bracket is hot dipped galvanized for added years of life. The End Super Sundeck Bracket is equipped with 6 pre greased 1/2" diameter, 1” long square head set screws, installed in the nut on the 2” pipe sleeves, for locking the 1-1/2" framework pipe. Two 5/16” diameter x 3/4" long carriage bolts with nuts are inserted into the Super Sundeck C Channel bracketing. The Super Sundeck End Bracket weighs 59 pounds.

 

The Continuous Super Sundeck Bracket is equipped with 10 pre greased 1/2" diameter, 1” long square head set screws installed in the nut on the 2” pipe sleeves for locking the 1-1/2" framework pipe. Two 5/16” diameter x ¾” long carriage bolts with nuts are inserted into one side of the C Channel bracketing. The Super Sundeck Continuous Bracket weighs 61 pounds.